 |
| 起源の場所: | 中国 |
| ブランド名: | kacise |
| 証明: | CE |
| モデル番号: | KUS3000 |
| 最小注文数量: | 0-100 |
|---|---|
| 価格: | Negotiable |
| パッケージの詳細: | 共通のパッケージか注文のパッケージ |
| 受渡し時間: | 3-10DAYS |
| 支払条件: | L/C、D/A、D/P、T/T、ウェスタン・ユニオン、MoneyGram |
| 供給の能力: | 100 |
| 範囲の感知: | 400…15000のmm | 調整範囲: | 400….15000mm |
|---|---|---|---|
| 使用不可能な区域: | 0の… 300のmm | 標準的なターゲット版: | 100つのmm X 100つのmm |
| トランスデューサーの頻度: | approx.50 kHz | 応答の遅れ: | およそ40氏 |
| ハイライト: | IP67休眠モードの超音波水平な調査,超音波水平な調査50kHz,防蝕超音波水平な調査 |
||
Sleep Mode Ultrasound Level Probe Various Working Modes
Adjusting the switching points and the analog output.
Switching output and analog output type sensor can be programmed according to user needs.
There are eight types of output functions can be programmed.
All teaching procedures are as follows,
In step 1 the relevant teaching conditions (or high-level voltage GND) teaching point. Step 2 selected from different (and different from step1) and different points of teaching conditions (with different step1). Routine must be completed during a blue LED flashes, otherwise the default value will be valid.
The ultrasonic sensor features a switch output with two teachable switching points. These are set by applying the supply voltage - UB or + UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate whether the sensor has recognized the target during the TEACH-IN procedure. Switching point A1 is taught with - UB, A2 with +UB. Five different output functions can be set.
1, a single switching point, a gap having a hysteresis function normally open.
2, a single switching point having a hysteresis function normally closed gap.
3. The object presence detection - normally open function.
4. The presence of the detection object off opening function.
Switching point, Setting distance only after power on. The internal clock can assure can't be
Product features
High sensitivity
Small size
IP67 protection level
Corrosion-resistant shell, suitable for corrosive media and applications
Sensor Commands
Each command has a total of 6(or 8)bytes, and all sensor commands are sent and displays by HEX. The sensor ID Tag uses 01 as an example
| LED displays | |||
| Programming time | Working time | ||
| Red LED | ON | -- | Error accured |
| OFF | Working well | Working well | |
| Flash |
Doing the echo lost program, For Single switching point, program, or Detection of object. |
----- | |
| Yellow LED | ON | ---- | Object detacted |
| OFF | ------ | Echo lost | |
| Flash |
Teach in for the status ready, That means the sensor has locked the set distance for program |
----- | |
| Blue LED | ON | Power on | Power on |
| OFF | Power off | Power off | |
| Flash |
Program period indication, Only the blue led flashes the program routine can be done |
Program can be carried on | |
| Output type |
1 switch output E4, NPN NO/NC, programmable 2 switch output E4, PNP NO/NC, programmable 3 Analog 0-10V output E4 programmable. 4 Analog 4-20mA output E4 programmable 5 RS485 output E4 programmable. |
| Rated operating current Ie | 200 mA , short-circuit/overload protected |
| Default setting | Switching point A1:150mm Switching point A2: 1000mm |
| Voltage drop | ≤ 2.5 V |
| Repeat accuracy | ≤1 % |
| Switching frequency f | ≤ 13 Hz(customized for high frequency version) |
| Range hysteresis H | 5 % of the set operating distance |
| Temperature influence | ±1.5% of full-scale value |
Ambient conditions
| Ambient temperature | -25…70℃(248...343K) |
| Storage temperature | -40…85℃(233...358K) |
Mechanical specifications
| Connection | V1 connector(M12×1),4-pin |
| Protection degree | IP67 |
| Material Housing | brass, nickel-plated |
| Transducer |
epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
コンタクトパーソン: Ms. Evelyn Wang
電話番号: +86 17719566736
ファックス: 86--17719566736
